Login/Sign Up

Our Locations:

  • Beltsville MD 20705
  • Kansas City KS 66103
  • Riverside CA 92508

Welcome to TS Cables Store

  • TS Cables
  • September 21, 2022

CCA VS Bare Copper Cable

The installation of an electrical wiring Bulk Plenum Copper system in a homes and businesses requires a detailed knowledge of the many types of electrical wires and their compatibility. Even a tiny mistake might have serious implications, such as presenting a danger.

This is why most electrical experts and homeowners prefer copper wire in most setups. Copper wire has a number of characteristics that make it a safe electrical cable to use in homes, buildings, and even devices. CCA cable is also frequently used in distribution networks, with numerous aluminum cables buried beneath the road as power cables.

If you’ve looked for Ethernet data cabling recently, you’ve probably seen that Copper Clad Aluminum, or bare copper wire, appears to be a good deal. We’ll go through some of the differences between CCA and bare Bulk Plenum Copper wire in this article.

Bare Copper Cable:

Copper is without a doubt the most widely utilized metal in the world for a variety of uses. Copper is popular not just because of its great heat and electricity conductivity, but also because of its incredible versatility.

Bare Cat5e Plenum Copper cable is not insulated and commonly known as ground wire, provides no protection. Most wires and cables use this sort of copper wire as their foundation. The bare copper wire is solid and hard, but it can be made flexible and could be used as cables in situations where it is not always straight and strong.

The most common application for bare copper cable is in overhead power transmission and distribution. Copper cable that can transport power over great distances is in high demand in today’s developing globe. They are often employed in urban areas.

Some Facts About Bare Copper Cable:

• Copper cable comes in two types in the electric industry: insulated and non-insulated. They’re both used in distinct ways. When meltability and flexibility are required, bare copper wire is often used.

  • Wires made of bare copper such like Cat6 Plenum Pure Copper are extremely bendable and elastic. They are extremely strong and do not break even when subjected to extreme weights. Because of their versatility, they are quite convenient to use and can even be employed in difficult-to-reach regions.
  • The wire comes in a variety of gauge lengths. Copper Oxide impurities can occasionally be found in bare copper cable. Copper wire is occasionally insulated by coating it with other metals. It can also be insulated by applying a vinyl coating.

    • Depending on the use, a copper cable wire can have numerous supports or a single strand. The well-known green colored thin wire, often known as bare copper wire, is classified as a ground wire.

  • Bare Copper wire’s primary advantage is its conductivity. Copper is a particularly conductive metal; therefore, copper wires are extremely long-lasting. After silver, copper is the most conductive metal.
  • As a result, copper wire can be found in a variety of AWG diameters or in a single solid form. Bare Copper wires are always a solid choice for electrical connections.

    • Copper wire is the preferred wire in homes because of its high compatibility. Bare copper wire is used in the majority of electrical devices and appliances. As a result, galvanic reactions can occur when other wires are used with bare copper wire.

  • Copper wire is not incompatible with other metals. Copper wires are extensively utilized in modern appliances. Another feature that makes bare copper wires so important is their durability.

Keep in mind that combining copper wires with other metal wires can result in galvanization, which can be harmful to the equipment. As a result, copper wire is recommended for use in appliances.

The abbreviation CCA stands for copper clad “aluminum.” CCA is an aluminum conductor with a thin copper coating. The cost of CCA cable is lower. CCA cable, on the other hand, has a lower tensile strength and can be broken down more easily. It may also cause transmission failure in the construction field.

Encasing an aluminum rod in a layer of copper strip is how it’s made. Its main drawbacks when compared to copper are such lack of flexibility, higher resistance, and lower conductivity. Data loss will occur during transmission, even if it claims to have same conductivity as copper.

As a result, transmission speed will drop, and the system will be unable to meet transmission speed requirements in the long run. It’s impossible to see the difference even when the cable jacket of CCA cable is taken back to reveal the twisted pairs. The difference lies in the conductor wire’s structure.

Some Facts About CCA CABLE:
• To begin with, copper is more resistant to corrosion than aluminum. This means that copper can sustain higher draw tensions during installation. With CCA wire, Ethernet data transmissions cannot be carried over long distances.

  • If you notice that the conductors are particularly delicate and break when removing bends during installation, you should probably take a step back and examine the issue.
  • CCA cables have a very different performance and safety profile than standard cables. In fact, with Cat5e and Cat6 connections, aluminum network cables are in contradiction of TIA and IEC rules.

    • As a result, there’s a higher chance of data loss. As more data is re-transmitted, your network will become slower.

  • CCA is much lighter than copper, and aluminum is about a third the price of copper, resulting in cost savings.
  • CCA cables also have a 55 percent higher DC resistance than standard cables. This reduces the amount of energy that can be turned to heat while increasing the amount of power that can be transferred. They can’t be utilized for power over Ethernet because of this (PoE).

    • Aluminum wire complicates installation, therefore these cut corners have an impact on installers as well. Because of their reduced tensile strength, aluminum cables can be destroyed when pressed.

  • Single conductors can split, making the wire useless, or the entire cable can break. Aluminum wires also have a reduced size and shape.
  • You won’t be able to bend it as far before it breaks because of this. In a nutshell, copper aluminum wires are weaker.

    It is widely used in today’s society, making its use necessary. Copper is utilized in both the industrial and home sectors in a variety of ways and for a wide range of applications. Cat6a Plenum Solid Pure Copper is the most frequent metal used in cable manufacturing.

Appliances made of bare copper cable can be recycled. Because bare copper wire does not catch wire, it is highly recommended for appliances that create a lot of heat. They’re safe and won’t melt if you overload them.

CCA, on the other hand, has produced a number of network issues. Lack of compliance, low flexibility, oxidation, and corrosion are among issues that a user may face. It’s also unsuitable for PoE applications.

prev post next post

Sign up to Newsletter

...and receive Latest Updates From Our Blog