{"title":"Fiber Optic","description":"\u003cp\u003eFiber optic patch cords, pigtails and trunk cables. Singlemode and multimode, LC, SC, ST and MTP terminations, in a range of lengths.\u003c\/p\u003e","products":[{"product_id":"pigtail-lc-apc-12-colors-singlemode-9-125-os2-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/APC 12 colors Singlemode 9\/125 OS2 G657A1 0.9mm OFNR 3M semitight","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFiber optic pigtails are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620857577778,"sku":"01LCAG2J50.9SC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-SM-APC-A-JPG_5bee9f7f-dea9-4184-9f6b-70bb775c9c4a.jpg?v=1787348202"},{"product_id":"pigtail-lc-apc-06-colors-sm-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/APC 06 colors SM G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620857970994,"sku":"01LCAG2J50.9SC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-SM-APC-A-JPG.jpg?v=1787348204"},{"product_id":"pigtail-lc-apc-sm-g657a1-sx-0-9mm-ofnr-yellow-semitight","title":"Pigtail LC\/APC SM G657A1 SX 0.9mm OFNR Yellow, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620858036530,"sku":"01LCAG2J50.9SY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620858069298,"sku":"01LCAG2J50.9SY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-apc-sx_4bcd7547-79ca-4afd-a54c-2b8ed6f11126.jpg?v=1787348205"},{"product_id":"pigtail-lc-apc-12-colors-sm-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/APC 12 colors SM G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620955980082,"sku":"01LCAG2J50.9TC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-SM-APC-A-JPG.jpg?v=1787348206"},{"product_id":"pigtail-lc-apc-06-colors-sm-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/APC 06 colors SM G657A1 0.9mm OFNR 3M,tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956209458,"sku":"01LCAG2J50.9TC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-SM-APC-A-JPG_1972ecfd-8be7-4432-8d22-909ffed1aa64.jpg?v=1787348208"},{"product_id":"pigtail-lc-apc-sm-g657a1-sx-0-9mm-ofnr-yellow-tight-buffer","title":"Pigtail LC\/APC SM G657A1 SX 0.9mm OFNR Yellow, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.\u003c\/p\u003ep\u0026gt;","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620956406066,"sku":"01LCAG2J50.9TY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620956438834,"sku":"01LCAG2J50.9TY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-apc-sx.jpg?v=1787348208"},{"product_id":"pigtail-lc-upc-12-colors-singlemode-os2-9-125-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003ePigtail LC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, semitight\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956635442,"sku":"01LCUG2J50.9SC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01lcug250.9tc12-angle_552cfa0e-7332-4819-82d2-28017d3c4fff.jpg?v=1787348210"},{"product_id":"pigtail-lc-upc-6-colors-singlemode-os2-9-125-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 6 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003ePigtail LC\/UPC 6 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, semitight\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It's also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required. Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance. UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956766514,"sku":"01LCUG2J50.9SC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01lcug250.9tc6-angle.jpg?v=1787348211"},{"product_id":"pigtail-lc-upc-singlemode-os2-9-125-g657a1-sx-0-9mm-ofnr-3m-yellow-semi-tight","title":"Pigtail LC\/UPC Singlemode OS2 9\/125 G657A1 SX 0.9mm OFNR 3M Yellow, semi tight","description":"\u003cp\u003ePigtail LC\/UPC Singlemode OS2 9\/125 G657A1 SX 0.9mm OFNR 3M Yellow, semi tight\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956832050,"sku":"01LCUG2J50.9SY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01LCUG2J50.9TY-coil.jpg?v=1787348212"},{"product_id":"pigtail-lc-upc-12-colors-singlemode-os2-9-125-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003ePigtail LC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956897586,"sku":"01LCUG2J50.9TC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01lcug250.9tc12-angle.jpg?v=1787348213"},{"product_id":"pigtail-lc-upc-6-colors-singlemode-os2-9-125-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 6 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003ePigtail LC\/UPC 6 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620956930354,"sku":"01LCUG2J50.9TC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01lcug250.9tc6-angle_8eacefe8-73bb-4351-8989-ca5e5c4e0943.jpg?v=1787348214"},{"product_id":"pigtail-lc-upc-singlemode-os2-9-125-g657a1-sx-0-9mm-ofnr-yellow-tight-buffer","title":"Pigtail LC\/UPC Singlemode OS2 9\/125 G657A1 SX 0.9mm OFNR Yellow, tight buffer","description":"\u003cp\u003ePigtail LC\/UPC Singlemode OS2 9\/125 G657A1 SX 0.9mm OFNR 1M Yellow, tight buffer\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620957028658,"sku":"01LCUG2J50.9TY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620957061426,"sku":"01LCUG2J50.9TY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01LCUG2J50.9TY-coil_12a15ed9-66b9-43d8-ab92-b44d46ac4a80.jpg?v=1787348215"},{"product_id":"pigtail-lc-upc-om3-sx-0-9mm-ofnr-aqua-semitight","title":"Pigtail LC\/UPC OM3 SX 0.9mm OFNR Aqua, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620957126962,"sku":"01LCUM3J50.9SA1.0M","price":1.8,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620957159730,"sku":"01LCUM3J50.9SA3.0M","price":2.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-upc-om34_d58790d8-4eca-4832-ad3d-922642b9ad36.jpg?v=1787348216"},{"product_id":"pigtail-lc-upc-12-colors-om3-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 12 colors OM3 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957225266,"sku":"01LCUM3J50.9SC123.0M","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-OM3-TC-MM-A-jpg_5f3bd647-988e-49e2-b25d-df9c133db237.jpg?v=1787348218"},{"product_id":"pigtail-lc-upc-06-colors-om3-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 06 colors OM3 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957258034,"sku":"01LCUM3J50.9SC63.0M","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-OM4-MM-A-JPG_424ed62b-cc28-4946-a2b7-7f37bfce0b63.jpg?v=1787348219"},{"product_id":"pigtail-lc-upc-om3-sx-0-9mm-ofnr-aqua-tight-buffer","title":"Pigtail LC\/UPC OM3 SX 0.9mm OFNR Aqua, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620957356338,"sku":"01LCUM3J50.9TA1.0M","price":1.8,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620957389106,"sku":"01LCUM3J50.9TA3.0M","price":2.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-upc-om34.jpg?v=1787348220"},{"product_id":"pigtail-lc-upc-12-colors-om3-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 12 colors OM3 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957454642,"sku":"01LCUM3J50.9TC123.0M","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-OM3-TC-MM-A-jpg.jpg?v=1787348221"},{"product_id":"pigtail-lc-upc-06-colors-om3-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 06 colors OM3 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957520178,"sku":"01LCUM3J50.9TC63.0M","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-OM4-MM-A-JPG.jpg?v=1787348222"},{"product_id":"pigtail-lc-upc-om4-sx-0-9mm-ofnr-aqua-semitight","title":"Pigtail LC\/UPC OM4 SX 0.9mm OFNR Aqua, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620957552946,"sku":"01LCUM4J50.9SA1.0M","price":2.24,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620957585714,"sku":"01LCUM4J50.9SA3.0M","price":3.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-upc-om34_94a82da3-8e49-4a0a-a294-56bbddc6610e.jpg?v=1787348223"},{"product_id":"pigtail-lc-upc-12-colors-om4-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 12 colors OM4 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957684018,"sku":"01LCUM4J50.9SC123.0M","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-OM4-MM-A-JPG.jpg?v=1787348224"},{"product_id":"pigtail-lc-upc-06-colors-om4-0-9mm-ofnr-3m-semitight","title":"Pigtail LC\/UPC 06 colors OM4 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957749554,"sku":"01LCUM4J50.9SC63.0M","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-OM4-MM-A-JPG_5ffb2cae-d509-41a9-9225-539f790089a8.jpg?v=1787348225"},{"product_id":"pigtail-lc-upc-om4-sx-0-9mm-ofnr-aqua-tight-buffer","title":"Pigtail LC\/UPC OM4 SX 0.9mm OFNR Aqua, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.The LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It?s also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620957815090,"sku":"01LCUM4J50.9TA1.0M","price":2.24,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620957847858,"sku":"01LCUM4J50.9TA3.0M","price":3.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/lc-upc-om34_bb1e2ce8-8f97-4d73-ad98-90c6e001c9fc.jpg?v=1787348226"},{"product_id":"pigtail-lc-upc-12-colors-om4-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 12 colors OM4 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957913394,"sku":"01LCUM4J50.9TC123.0M","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-12-OM4-MM-A-JPG_cbd06cdf-e29e-4c02-a4a2-fcf2c497256f.jpg?v=1787348227"},{"product_id":"pigtail-lc-upc-06-colors-om4-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail LC\/UPC 06 colors OM4 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620957978930,"sku":"01LCUM4J50.9TC63.0M","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/LC-6-OM4-MM-A-JPG_3e315a38-1fb7-4587-9f8a-60801b893894.jpg?v=1787348229"},{"product_id":"pigtail-sc-apc-12-colors-sm-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/APC 12 colors SM G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958044466,"sku":"01SCAG2J50.9SC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-SM-APC-A-JPG_94cb378d-deb2-43a1-a6cd-729ca10d75f3.jpg?v=1787348230"},{"product_id":"pigtail-sc-apc-06-colors-sm-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/APC 06 colors SM G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958110002,"sku":"01SCAG2J50.9SC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-SM-APC-A-JPG_1d9a963b-24a8-4276-b806-3e4149336fbc.jpg?v=1787348231"},{"product_id":"pigtail-sc-apc-sm-g657a1-sx-0-9mm-ofnr-1m-yellow-semitight","title":"Pigtail SC\/APC SM G657A1 SX 0.9mm OFNR 1M Yellow, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958142770,"sku":"01SCAG2J50.9SY1.0M","price":2.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-apc-sx_ebf94d4e-894c-4131-8109-56a0a980fd39.jpg?v=1787348232"},{"product_id":"pigtail-sc-apc-sm-g657a1-sx-0-9mm-ofnr-3m-yellow-semi-tight","title":"Pigtail SC\/APC SM G657A1 SX 0.9mm OFNR 3M Yellow, semi tight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958241074,"sku":"01SCAG2J50.9SY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-apc-sx.jpg?v=1787348233"},{"product_id":"pigtail-sc-apc-12-colors-sm-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/APC 12 colors SM G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958306610,"sku":"01SCAG2J50.9TC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-SM-APC-A-JPG.jpg?v=1787348235"},{"product_id":"pigtail-sc-apc-06-colors-sm-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/APC 06 colors SM G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958404914,"sku":"01SCAG2J50.9TC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-SM-APC-A-JPG.jpg?v=1787348238"},{"product_id":"pigtail-sc-apc-sm-g657a1-sx-0-9mm-ofnr-yellow-tight-buffer","title":"Pigtail SC\/APC SM G657A1 SX 0.9mm OFNR Yellow, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Some applications are more sensitive to return loss than others; they call for APC connectors. For example, in higher optical wavelength ranges (above 1500 nanometers) like those used for RF video signals, reflected light can adversely impact the signal. That is why we see APC connectors being used by most cable companies and other FTTX providers in outside plant applications.\u003c\/p\u003e\n\u003cp\u003eAPC connectors are also commonly used in passive optical applications (both GPONs and passive optical LANs) due to the fact that many of these systems also use RF signals to deliver video. Future higher-speed passive optical networks and other WDM applications that will use higher wavelengths via singlemode fiber will also likely require the reduced return loss of APC connectors. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620958437682,"sku":"01SCAG2J50.9TY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620958470450,"sku":"01SCAG2J50.9TY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-apc-sx_a4d898a2-a5a8-4010-9e7b-34b12e2b578d.jpg?v=1787348237"},{"product_id":"pigtail-sc-upc-12-colors-sm-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/UPC 12 colors SM G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958568754,"sku":"01SCUG2J50.9SC123.0M","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-SM-A-JPG.jpg?v=1787348238"},{"product_id":"pigtail-sc-upc-06-colors-sm-g657a1-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/UPC 06 colors SM G657A1 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958601522,"sku":"01SCUG2J50.9SC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-SM-A-JPG.jpg?v=1787348239"},{"product_id":"pigtail-sc-upc-sm-g657a1-sx-0-9mm-ofnr-1m-yellow-semi-tight","title":"Pigtail SC\/UPC SM G657A1 SX 0.9mm OFNR 1M Yellow, semi tight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958667058,"sku":"01SCUG2J50.9SY1.0M","price":2.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-upc-sm-sx_d73a1c7d-469c-428a-b3a5-ec2b71463d67.jpg?v=1787348240"},{"product_id":"pigtail-sc-upc-sm-g657a1-sx-0-9mm-ofnr-3m-yellow-semitight","title":"Pigtail SC\/UPC SM G657A1 SX 0.9mm OFNR 3M Yellow, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958732594,"sku":"01SCUG2J50.9SY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-upc-sm-sx.jpg?v=1787348241"},{"product_id":"pigtail-sc-upc-12-colors-singlemode-os2-9-125-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003ePigtail SC\/UPC 12 colors Singlemode OS2 9\/125 G657A1 0.9mm OFNR 3M, tight buffer\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958798130,"sku":"01SCUG2J50.9TC123.0M","price":19.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/01SCUG2J50.9TC12-angle.jpg?v=1787348243"},{"product_id":"pigtail-sc-upc-06-colors-sm-g657a1-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 06 colors SM G657A1 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620958863666,"sku":"01SCUG2J50.9TC63.0M","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-SM-A-JPG_e74b7070-0ad3-446e-9dfc-8321c9b270b2.jpg?v=1787348244"},{"product_id":"pigtail-sc-upc-sm-g657a1-sx-0-9mm-ofnr-yellow-tight-buffer","title":"Pigtail SC\/UPC SM G657A1 SX 0.9mm OFNR Yellow, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The SC is a snap-in connector which also features a 2.5mm ferrule much like the ST connector and is known for its excellent performance. The connector is simple, rugged, and low cost. Its simple push on\/pull off operations makes it a popular choice.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620958929202,"sku":"01SCUG2J50.9TY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620958961970,"sku":"01SCUG2J50.9TY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/sc-upc-sm-sx_0a604d10-8b3f-4139-8344-bfe8a40d8353.jpg?v=1787348245"},{"product_id":"pigtail-sc-upc-12-colors-om3-0-9mm-ofnr-3m-semi-tight","title":"Pigtail SC\/UPC 12 colors OM3 0.9mm OFNR 3M, semi tight","description":"\u003cp\u003ePigtail SC\/UPC 12 colors OM3 0.9mm OFNR 3M, semi-tight\u003c\/p\u003e\n\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959060274,"sku":"01SCUM3J50.9SC123.0M","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-OM3-MM-A-JPG_df5de765-d521-4187-9e1e-58b0a95a0f1b.jpg?v=1787348246"},{"product_id":"pigtail-sc-upc-06-colors-om3-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/UPC 06 colors OM3 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959125810,"sku":"01SCUM3J50.9SC63.0M","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-OM3-MM-SC-A-jpg_6fde75b0-e8bd-48e4-b336-ad222b7ee6c6.jpg?v=1787348247"},{"product_id":"pigtail-sc-upc-12-colors-om3-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 12 colors OM3 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959224114,"sku":"01SCUM3J50.9TC123.0M","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-OM3-MM-A-JPG.jpg?v=1787348248"},{"product_id":"pigtail-sc-upc-06-colors-om3-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 06 colors OM3 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM3 has a suggested jacket color of aqua. Like OM2, its core size is 50?m, but the cable is optimized for laser-based equipment that uses fewer modes of light. As a result of this optimization, it is capable of 10 Gigabit Ethernet at lengths up to 300 meters. Since its inception, production techniques have improved the overall capabilities of OM3 to enable its use with 40 Gigabit and 100 Gigabit Ethernet up to 100 meters. 10 Gigabit Ethernet is its most common use.\u003c\/p\u003e\n\u003cp\u003eNewer deployments often use laser-optimized 50\/125 ?m multi-mode fiber (OM3). Fibers that meet this designation provide sufficient bandwidth to support 10 Gigabit Ethernet up to 300 meters. Optical fiber manufacturers have greatly refined their manufacturing process since that standard was issued and cables can be made that support 10 GbE up to 400 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959289650,"sku":"01SCUM3J50.9TC63.0M","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-OM3-MM-SC-A-jpg.jpg?v=1787348250"},{"product_id":"pigtail-sc-upc-12-colors-om4-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/UPC 12 colors OM4 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959355186,"sku":"01SCUM4J50.9SC123.0M","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-OM4-MM-A-JPG.jpg?v=1787348251"},{"product_id":"pigtail-sc-upc-06-colors-om4-0-9mm-ofnr-3m-semitight","title":"Pigtail SC\/UPC 06 colors OM4 0.9mm OFNR 3M, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Strippable Tight Buffer\u003cbr\u003e\nA buffer where the gap is not visible under 100 power magnification, no interstitial material defined as loose powder or liquid is used, and at least 10 cm of material can be removed with one circular cut.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959420722,"sku":"01SCUM4J50.9SC63.0M","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-OM3-MM-SC-A-jpg_e2f0f329-ea7b-416b-b158-d3bd7e0f66e4.jpg?v=1787348252"},{"product_id":"pigtail-sc-upc-12-colors-om4-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 12 colors OM4 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959486258,"sku":"01SCUM4J50.9TC123.0M","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-12-OM4-MM-A-JPG_e51b8dd9-40fc-4a25-9ceb-18fc306216d4.jpg?v=1787348253"},{"product_id":"pigtail-sc-upc-06-colors-om4-0-9mm-ofnr-3m-tight-buffer","title":"Pigtail SC\/UPC 06 colors OM4 0.9mm OFNR 3M, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.OM4 has a suggested jacket color of aqua. It is a further improvement to OM3. It too uses a 50?m core, but it supports 10 Gigabit Ethernet at lengths up 550 meters and it supports 100 Gigabit Ethernet at lengths up to 150 meters. Laser optimized multi-mode fiber (LOMMF) is designed for use with 850 nm VCSELs.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.Tight buffer\u003cbr\u003e\nTight-buffered construction uses 900?m buffered fibers. The core is protected by two-layer coating. The first is plastic and the second is waterproof acrylate. The core of the cable is never at risk of exposure, unlike the loose-buffered cable which can escape its confines. Fibers are surrounded by dielectric strength members (FRP) and are protected by a rugged polyurethane outer jacket and provides superior environmental and mechanical protection. The fiber count for tight-buffered fiber cable varies from 1 to 144 fibers, but generally cables with 2, 6, 12, 24 fibers are most commonly used. Larger fiber counts such as 48 fibers, 96 fibers and 144 fibers are also available for specific applications.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"Default Title","offer_id":51620959519026,"sku":"01SCUM4J50.9TC63.0M","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/SC-6-OM4-MM-A-JPG_d7157208-0911-46dc-a03c-dd685586f7d5.jpg?v=1787348254"},{"product_id":"pigtail-st-upc-sm-g657a1-sx-0-9mm-ofnr-yellow-semitight","title":"Pigtail ST\/UPC SM G657A1 SX 0.9mm OFNR Yellow, semitight","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The ST connector remains one of the most widely used connectors especially for multimode networks such as college campuses and most buildings. The connector is very easy to use due to its spring-loaded, keyed, and ?push in and twist? mechanism within its design. The ST connector features a bayonet mount and a long cylindrical 2.5mm ceramic or polymer ferrule to hold the fiber.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620959617330,"sku":"01STUG2J50.9SY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620959650098,"sku":"01STUG2J50.9SY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/st-upc-sm-sx_79005b50-4c17-4e0b-94d1-1869e109d310.jpg?v=1787348255"},{"product_id":"pigtail-st-upc-sm-g657a1-sx-0-9mm-ofnr-yellow-tight-buffer","title":"Pigtail ST\/UPC SM G657A1 SX 0.9mm OFNR Yellow, tight buffer","description":"\u003cp\u003eFiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High-quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box.G.657A1 is the NEW de facto standard for bend-insensitive NDSF SMF for premises cabling, thanks to optimized performance and cost balance. Minimum bending radii can be optimized, but this sacrifices fiber attenuation and cost. ITU-T G.657A1 and A2 are fully compliant with G.652D, and can offer enhanced, low-loss fiber. Bend-insensitive NDSF is defined in ITU-T G.657, with different minimum bending radii characteristics: G.657A1 (10 ?m).\u003c\/p\u003e\n\u003cp\u003eWhen weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. The ST connector remains one of the most widely used connectors especially for multimode networks such as college campuses and most buildings. The connector is very easy to use due to its spring-loaded, keyed, and ?push in and twist? mechanism within its design. The ST connector features a bayonet mount and a long cylindrical 2.5mm ceramic or polymer ferrule to hold the fiber.UPC connectors are polished with no angle. UPC connectors are not exactly flat, however; they have a slight curvature for better core alignment. Another more obvious difference is color. UPC connectors are blue while APC connectors are green.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620959682866,"sku":"01STUG2J50.9TY1.0M","price":2.2,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620959715634,"sku":"01STUG2J50.9TY3.0M","price":2.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/st-upc-sm-sx.jpg?v=1787348256"},{"product_id":"patchcord-fc-upc-fc-upc-singlemode-os2-9-125-g675a1-duplex-zip-2-0mm-ofnr-yellow","title":"Patchcord FC\/UPC - FC\/UPC Singlemode OS2 9\/125 G675A1 Duplex Zip 2.0mm OFNR Yellow","description":"\u003cp\u003ePatchcord FC\/UPC - FC\/UPC Singlemode OS2 9\/125 G675A1 Duplex Zip 2.0mm OFNR Yellow\u003c\/p\u003e\n\u003cp\u003eShaxon’s  FC\/UPC – FC\/UPC 9\/125 OS2  patch cords feature a rugged yellow 2.0.mm duplex zip cord jacket and high quality FC connectors. Polarity is clearly marked with yellow polarity labels.\u003c\/p\u003e\n\u003cp\u003eThe FC connector was widely popular within fiber optic networks however its use has been dwindling in recent times replaced with SC and LC. The connector uses a threaded container and aligned key. Once positioned it can remain in place with perfect precision.G675A1 bending insensitive single-mode fibre encompasses all the features and provides good resistance to maro-bending. It has low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-C-L band (1260 -1625 nm). It offers good resistance to additional losses due to low macro-bending in the 1625 nm wavelength region. This not only supports L-band applications but also allows for easy installation without excessive care when storing the fibre.When weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.\u003c\/p\u003e\n\u003cp\u003eFor other ultra-long-distance transmissions that employ exclusively C-band and L-band with optical amplifiers, refer to the ITU-T recommendations for the most appropriate SMF types.\u003c\/p\u003e\n\u003cp\u003eMulti-mode fiber is typically cost effective for inside buildings or corporate campuses while single-mode is better suited for longer distance runs. Single-mode fiber can transmit over greater distances but typically requires more expensive equipment. Multi-mode is cost effective for installations where the lengths do not exceed a few hundred meters.The International Telecommunication Union (ITU) is the United Nations specialized agency for information and communication technologies ? ICTs.\u003c\/p\u003e\n\u003cp\u003eFounded in 1865 to facilitate international connectivity in communications networks, we allocate global radio spectrum and satellite orbits, develop the technical standards that ensure networks and technologies seamlessly interconnect, and strive to improve access to ICTs to underserved communities worldwide.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620959813938,"sku":"02FCUFCUG2J52.0DXY1.0M","price":8.0,"currency_code":"USD","in_stock":false},{"title":"2M","offer_id":51620959846706,"sku":"02FCUFCUG2J52.0DXY2.0M","price":8.48,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620959879474,"sku":"02FCUFCUG2J52.0DXY3.0M","price":8.94,"currency_code":"USD","in_stock":false},{"title":"4M","offer_id":51620959912242,"sku":"02FCUFCUG2J52.0DXY4.0M","price":9.42,"currency_code":"USD","in_stock":false},{"title":"5M","offer_id":51620959945010,"sku":"02FCUFCUG2J52.0DXY5.0M","price":9.88,"currency_code":"USD","in_stock":false},{"title":"7M","offer_id":51620959977778,"sku":"02FCUFCUG2J52.0DXY7.0M","price":10.82,"currency_code":"USD","in_stock":false},{"title":"10M","offer_id":51620960010546,"sku":"02FCUFCUG2J52.0DXY10.0M","price":12.2,"currency_code":"USD","in_stock":false},{"title":"15M","offer_id":51620960043314,"sku":"02FCUFCUG2J52.0DXY15.0M","price":14.58,"currency_code":"USD","in_stock":false},{"title":"20M","offer_id":51620960076082,"sku":"02FCUFCUG2J52.0DXY20.0M","price":16.94,"currency_code":"USD","in_stock":false},{"title":"30M","offer_id":51620960108850,"sku":"02FCUFCUG2J52.0DXY30.0M","price":21.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/02FCUFCUG2J52.0DXY-dual-side-s_944d3ad8-2092-44ae-a133-fff453ed3705.jpg?v=1787348257"},{"product_id":"lc-upc-uniboot-lc-upc-uniboot-singlemode-os2-9-125-g657a1-round-cable-2-0mm-ofnr-yellow","title":"LC\/UPC uniboot -LC\/UPC uniboot Singlemode OS2 9\/125 G657A1 Round cable 2.0mm OFNR Yellow","description":"\u003cp\u003eLC\/UPC uniboot -LC\/UPC uniboot Singlemode OS2 9\/125 G657A1 Round cable 2.0mm OFNR Yellow\u003c\/p\u003e\n\u003cp\u003eShaxon’s  LC\/UPC uniboot -LC\/UPC uniboot Singlemode OS2 patch cords feature a rugged yellow 2.0.mm round jacket and high quality LC Uniboot connectors. Cable polarity can easily be changed . Polarity is clearly marked with a green designator on one of the connectors. Popular in data center applications, the simplex round two fiber 2mm cable takes up less room allowing for superior air flow and easier cable management.\u003c\/p\u003e\n\u003cp\u003eThe LC connectors are highly popular within single mode networks. It is known for good performance and small size. LC connectors have a 1.25mm ferrule, approximately half the size of SC connectors. It's also commonly referred to as the little connector. The LC connector is a small form factor (SFF) connector, which is designed to join LC fibers where a connection or disconnection is required. Single-mode fiber provides users with a greater transmission rate in addition to nearly 50 times longer distance as opposed to multi-mode fiber. However, single-mode fiber is more expensive than multi-mode fiber. Among all the differences between single-mode and multi-mode fibers, the most basic is the size difference in the fibers? core as well as the associated loss or attenuation and fiber bandwidth. When weighing your options between on-premises and access network fiber replacement or new installation, we highly recommend replacing legacy OS1 with a new bend-insensitive OS2 (ITU-T G.657A1) SMF cabling system to support longer reach with enhanced link performance.\u003c\/p\u003e\n\u003cp\u003eFor other ultra-long-distance transmissions that employ exclusively C-band and L-band with optical amplifiers, refer to the ITU-T recommendations for the most appropriate SMF types.\u003c\/p\u003e\n\u003cp\u003eMulti-mode fiber is typically cost effective for inside buildings or corporate campuses while single-mode is better suited for longer distance runs. Single-mode fiber can transmit over greater distances but typically requires more expensive equipment. Multi-mode is cost effective for installations where the lengths do not exceed a few hundred meters. The International Telecommunication Union (ITU) is the United Nations specialized agency for information and communication technologies ? ICTs.\u003c\/p\u003e\n\u003cp\u003eFounded in 1865 to facilitate international connectivity in communications networks, we allocate global radio spectrum and satellite orbits, develop the technical standards that ensure networks and technologies seamlessly interconnect, and strive to improve access to ICTs to underserved communities worldwide.\u003c\/p\u003e","brand":"Shaxon","offers":[{"title":"1M","offer_id":51620961485106,"sku":"02LB1LB1G2J52.0S2Y1.0M","price":12.6,"currency_code":"USD","in_stock":false},{"title":"2M","offer_id":51620961517874,"sku":"02LB1LB1G2J52.0S2Y2.0M","price":13.04,"currency_code":"USD","in_stock":false},{"title":"3M","offer_id":51620961550642,"sku":"02LB1LB1G2J52.0S2Y3.0M","price":13.48,"currency_code":"USD","in_stock":false},{"title":"5M","offer_id":51620961583410,"sku":"02LB1LB1G2J52.0S2Y5.0M","price":14.36,"currency_code":"USD","in_stock":false},{"title":"7M","offer_id":51620961616178,"sku":"02LB1LB1G2J52.0S2Y7.0M","price":15.24,"currency_code":"USD","in_stock":false},{"title":"10M","offer_id":51620961648946,"sku":"02LB1LB1G2J52.0S2Y10.0M","price":16.56,"currency_code":"USD","in_stock":false},{"title":"15M","offer_id":51620961681714,"sku":"02LB1LB1G2J52.0S2Y15.0M","price":18.76,"currency_code":"USD","in_stock":false},{"title":"20M","offer_id":51620961714482,"sku":"02LB1LB1G2J52.0S2Y20.0M","price":20.96,"currency_code":"USD","in_stock":false},{"title":"30M","offer_id":51620961747250,"sku":"02LB1LB1G2J52.0S2Y30.0M","price":25.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0908\/8070\/4818\/files\/02LB1LB1G2J52.0S2Y-dual-side-s.jpg?v=1787348258"}],"url":"https:\/\/tscables.com\/collections\/fiber-optic.oembed","provider":"TURNSTONE CABLES","version":"1.0","type":"link"}