Cat6a Shielded Cables

About Cat6A Shielded Cables

Cat6A shielded cables are built for networks that push higher data loads in environments where interference is a real concern. This collection focuses on cables that combine advanced shielding with improved internal spacing to support 10 Gigabit speeds over full distances.

A Cat6a shielded Ethernet cable is commonly chosen for data centers, commercial facilities, and outdoor pathways where signal clarity must remain steady. Options such as Cat6a shielded cable 1000 ft, plenum-rated, and burial-ready designs give installers flexibility across varied installations.

Specification:

Feature	Value / Spec	Standards Compliance	Professional Notes
Max Data Speed	10 Gbps	TIA/EIA-568.2-D	Guaranteed 10G over the full 100m distance.
Bandwidth	500 MHz	IEEE 802.3an	Massive overhead for uncompressed 4K/8K video.
Max Distance	100 Meters	ISO/IEC 11801	No speed drop-off regardless of cable density.
Wire Gauge	23 AWG	ASTM B3	Thicker insulation than Cat6 to prevent crosstalk.
Shielding	F/UTP or S/FTP	IEC 61156-5	S/FTP provides the highest EMI rejection level.
PoE Support	PoE++ (Type 4)	IEEE 802.3bt	Optimized for 100W PoE (Lighting/High-end APs).
Common Uses	Hospitals / Labs	RoHS / REACH	Eliminates "Alien Crosstalk" in dense bundles.
Grounding	Drain Wire Required	TIA-607-C	Essential for medical imaging & MRI environments.
Durability	Heavy Duty	UL-444	Thickest common cable; requires large conduits.

Enhanced Noise Control

Shielding layers reduce the impact of electrical interference. This keeps data transmission stable even near power lines or industrial equipment.

Full-Length 10Gb Support

Cat6A shielded cables are built to handle higher frequencies. This allows consistent 10 Gigabit Ethernet performance across standard structured cabling distances.

Grounding Compatibility

Shielded construction supports proper grounding paths. This protects connected equipment and helps control unwanted electrical energy.

Versatile Jacket Options

From indoor air spaces to outdoor trenches, options like Cat6a shielded plenum cable and Cat6a direct burial ethernet cable shielded meet different installation demands.

Bulk Cat6A Shielded Cable

Large spools, such as Cat6a shielded cable 1000 ft, work well for commercial projects requiring continuous runs and reduced splicing.

Shielded Patch Cables

Short lengths like a 100 ft cat6a shielded ethernet cable are ideal for connecting racks, switches, and panels in high-interference rooms.

Plenum-Rated Shielded Cat6A

Plenum versions use low-smoke jackets. They are intended for ceiling spaces where air circulates through building systems.

Direct Burial Shielded Cat6A

These cables feature moisture-resistant jackets. They support underground installation without additional conduit.

Enterprise Network Backbones

Shielded Cat6A supports heavy traffic between switches, servers, and storage systems across large facilities.

High-Interference Areas

Manufacturing floors and utility rooms benefit from shielding that protects signals from electrical noise.

Outdoor Network Extensions

Direct burial shielded options allow safe data transmission between buildings without signal degradation.

Air-Handling Spaces

Plenum-rated shielded Cat6A cables maintain safety compliance while delivering high-speed connectivity.

Upgrade demanding network installations with precision-built Cat6a shielded cable solutions from TS Cables.

How to ground Cat6A shielded cable?

Ground the cable through shielded connectors, bonded keystone jacks, and a grounded patch panel to ensure continuous shielding.

Do Cat6A cables need shielded keystone jacks?

Yes, shielded Cat6A cables require shielded keystone jacks to maintain grounding and shielding effectiveness.

Do I need shielded Cat6A?

Shielded Cat6A is recommended in environments with electrical noise, dense cabling, or outdoor and industrial installations.

How to terminate Cat6A shielded?

Use shielded RJ45 connectors, such as a Cat6a RJ45 shielded plug, keep shielding intact, and ensure proper grounding.

Is Cat6 shielded the same as Cat6A?

No, Cat6A supports higher bandwidth and longer 10Gb distances than Cat6, even when both are shielded.

Is Cat6A always shielded?

No, Cat6A can be shielded or unshielded. Shielded versions offer better noise protection in demanding environments.

What is Cat6A shielded?

It is a Cat6A Ethernet cable with added shielding to reduce interference and maintain stable high-speed data transmission.

What is the difference between Cat6A shielded and unshielded?

Shielded Cat6A resists electrical noise. Unshielded Cat6A relies only on internal cable design for interference control.