Cat5e Plenum Cables 1000ft
Our plenum-rated Cat5e cable carries a CMP jacket made to slow flames and give off low smoke if a fire starts. Inside are 4 twisted pairs of 24 AWG solid bare copper, tested up to 350 MHz for 1 Gbps speeds up to 328 ft (100 m).
Choose unshielded (UTP) for most offices and homes or foil-shielded (F/UTP) for spaces with electrical noise. Every reel is 1000 ft, and the CMP rating also covers riser and general-purpose areas, so one cable type handles the whole building.
It handles 10, 100 and 1000 Mbps networks. Newer access points can also link at 2.5 Gbps over it. We test our reels up to 350 MHz. The cable also carries PoE to cameras, VoIP phones and access points. Buy more boxes for bulk pricing. Delivery is free across the U.S.
Where Does a Cat5e Plenum-Rated Cable Belong?
Anywhere air moves through the building. That means the space above a drop ceiling, under a raised floor, or inside an air-return path. A Cat5e plenum cable 1000ft reel is made for exactly these spots. If a fire starts, the jacket won't feed it or fill the room with thick smoke, and that's what inspectors check for.
Why Choose Bulk Cat5e Plenum Cable Over Pre-Cut Cords?
Most crews switch to bulk Cat5e plenum cable for installations once a job passes a handful of drops. Here's why:
- Each foot costs less than it does in a pre-made cord.
- You cut every run to the exact length, with no loops of extra cable hiding in the ceiling.
- Fewer factory connectors mean fewer weak spots above the tiles.
Buy Cat5e Plenum Cable 1000ft and Save on Every Drop
Not every project needs Cat6. VoIP phones, IP cameras, and Gigabit desk runs work fine on Cat5e, and the savings add up across a big building. When buying Cat5e plenum cable, grab Cat5e-rated jacks and plugs too, so the whole link matches.
| Feature |
Details |
| Category |
Cat5e |
| Jacket Rating |
Plenum (CMP) |
| Conductor |
24 AWG solid bare copper |
| Pairs |
4 twisted pairs |
| Shielding |
Unshielded (UTP) or foil-shielded (F/UTP) |
| Bandwidth |
Tested up to 350 MHz |
| Speed |
1 Gbps up to 328 ft (100 m) |
| PoE |
PoE, PoE+, PoE++ (IEEE 802.3af/at/bt) |
| Length |
1000 ft |
| Colors |
Blue, Black, White |
| Standard |
ANSI/TIA-568.2-D |
Tested and Certified
Built to TIA ANSI/TIA-568.2-D Category 5e requirements. Finished runs can be checked with a Fluke tester, as shown on our Fluke-tested and certified cables page. Every reel is RoHS compliant. Projects that need third-party paperwork can browse our ETL-listed cables.
CMP Fire Rating
CMP is the highest fire rating for indoor network cable under the NEC. The jacket is tested to NFPA 262, which measures flame spread and smoke in air-handling spaces. That's why inspectors ask for it above suspended ceilings and below raised floors.
Low-Smoke Jacket
The flame-retardant jacket gives off less smoke and fewer toxic fumes than riser or CM cable. In a fire, that matters because plenum spaces carry air through the whole building.
24 AWG Solid Bare Copper
Pure copper carries data and PoE better than copper-clad aluminum (CCA). It runs cooler, passes certification more easily, and meets NEC and TIA rules for network cabling. CCA is not allowed in plenum runs that must meet code.
350 MHz Tested
The Cat5e standard asks for 100 MHz. Testing to 350 MHz leaves extra margin for bends, cable ties, and terminations in real installs.
PoE++ Ready
The cable supports IEEE 802.3af, 802.3at, and 802.3bt. Cameras, desk phones, and access points can draw power from the same run that carries their data.
Unshielded Plenum (UTP)
This is the everyday choice. It is lighter, easier to pull, and terminates with standard Cat5e RJ45 plugs and keystone jacks. Most ceiling runs in offices and classrooms use this cable.
Shielded Plenum (F/UTP)
The F/UTP version adds an aluminum foil shield and a tinned copper drain wire around all four pairs. Pick it for ceilings packed with fluorescent fixtures, HVAC motors, or power feeds. Terminate it with shielded connectors and bond it to ground. See our shielded Cat5e cables for more options.
1000 ft Pull Boxes
A cat5e plenum 1000ft box feeds cable straight out without twists. Printed footage numbers show how much is left. Lightweight makes it easy to move the box from room to room.
Bulk Orders for Large Projects
Contractors who buy bulk cat5e plenum cable save on cost per foot. Ordering several jacket colors at once also helps. Each system can get its own color, such as blue for data and yellow for cameras.
Drop Ceilings in Offices
Office ceilings often double as air returns. Our Cat5e plenum-rated cable meets code there and links desks, printers, and phones back to the network closet.
Classrooms and Schools
Schools run hundreds of drops through ceiling spaces. Plenum cable keeps the install code-compliant across every room and hallway.
IP Camera Networks
Cameras mounted in hallways and lobbies often get their cable through the ceiling. Cat5e plenum carries video and PoE power on one run.
VoIP Phone Systems
Desk phones need gigabit at most, which makes Cat5e a cost-effective fit for phone networks in large buildings.
Retail and Restaurants
Point-of-sale systems, menu boards, and Wi-Fi access points are usually wired through the ceiling. Plenum cable is the safe choice for these spaces.
Large Projects on a Budget
A bulk Cat5e plenum cable order keeps cost per foot low on jobs that only need gigabit. Order several reels for bulk pricing.
What is a plenum Cat5e cable?
It is a Cat5e network cable with a CMP-rated jacket. The jacket resists flame and gives off low smoke, which is what code requires in ceilings that move air.
When should I use plenum Cat5e cable?
Use it above drop ceilings, under raised floors, and in any space that moves air for heating or cooling. Local building code decides where it is required.
What is the difference between Cat5e riser cable and plenum?
Riser (CMR) cable is rated for vertical runs between floors. Plenum (CMP) has a stricter fire rating for air spaces. Plenum can replace riser, but riser cannot replace plenum.
Can Cat5e plenum cable be used with RJ45 connectors?
Yes, it works with Cat5e RJ45 plugs or keystone jacks rated for 24 AWG solid conductors. Use shielded connectors on the F/UTP version.
Is plenum Cat5e slower than regular Cat5e?
The jacket rating does not affect speed. Plenum Cat5e delivers the same 1 Gbps up to 328 ft as any Cat5e cable.
Do they make stranded plenum Cat5e?
Some brands do, but solid conductors are the standard for in-wall and ceiling runs. Stranded cable is mainly used for short patch cords. For non-plenum runs, see our Cat5e Ethernet cables.