A C13 is the female end of a power cord, with three slots. A C14 is the male end, with three pins. They are two halves of one matched pair, so a C13 plugs straight into a C14. You find the C13 on the cord that powers a PC, monitor, or printer.
You find the C14 on the back of the device or on a server rack strip. Both follow the same global standard for IEC power cords, and both carry 10 amps worldwide or 15 amps in North America. To give you a better idea, we break down the shape, ratings, pins, and best uses of each.
What is C13?
A C13 is the female plug at the device end of a power cord. It has three rectangular slots set in a rounded box shape. You've probably seen one at the back of your desktop PC. The standard behind it is IEC 60320, an international rulebook for appliance couplers.
A C13 connector is rated for 250 volts. It carries 10 amps under IEC rules and 15 amps under UL rules in the U.S. It works with devices whose pins stay below 70°C. That covers most office and home electronics.
Benefits of C13
The C13 has stayed popular for decades for good reason. A C13 plug fits millions of devices made by hundreds of brands. You can grab a spare from a drawer and it just works. Here are the main reasons installers and home users rely on it.
- It fits almost every desktop PC, monitor, and printer sold today.
- A firm friction fit keeps it seated without extra clips.
- The three-slot design includes a ground for safer use.
- Spare cords are cheap and easy to find in many lengths.
- Locking versions are available for racks that get bumped often.
Uses of C13
You'll find this end anywhere a device has a three-pin inlet. An IEC C13 power cord usually has a NEMA 5-15P wall plug on the other end in North America. That pairing powers most desk gear. The list below shows where the C13 shows up most often.
- Desktop computers and tower workstations.
- LCD monitors and many flat-screen TVs.
- Laser printers, scanners, and copiers.
- Network switches, routers, and small servers.
- Studio gear like mixers, amplifiers, and keyboards.
What is C14?
A C14 is the male side of the pair. It has three flat pins inside a recessed shell. Most of the time, it's built right into the back of a device as an inlet. You'll also see it on power strips in server racks and on short jumper cords.
A C14 connector shares the same ratings as the C13. That means 250 volts, 10 amps under IEC, and 15 amps under UL. North American wall plugs follow a separate NEMA plug system with its own shapes and ratings.
Benefits of C14
Device makers love the C14 because it turns any cord into a removable one. A C14 plug on a jumper cord also lets you power servers straight from a rack strip. That cuts down on bulky wall adapters. These are the perks that matter most.
- A damaged cord can be swapped in seconds without opening the device.
- The recessed pins keep fingers away from live metal.
- It mates with every standard C13 end, no matter the brand.
- Shipping one device worldwide only needs a different cord, not a new inlet.
- It handles the same 10 A or 15 A load as its female partner.
Uses of C14
The C14 lives mostly on the equipment side of the connection. A C13 to C14 power cord links a server to a rack power strip in data centers. It's also used as an extension when a device sits a little too far away. Here's where the C14 earns its keep.
- Power inlets on PCs, monitors, and printers.
- Outlets on rack-mounted power distribution units.
- UPS battery backup outputs for computers and network gear.
- Short jumper cords inside server and network cabinets.
- Inlets on lab and test equipment.
C13 vs C14: What Sets Them Apart?
These two ends are made to fit together, so most differences come down to gender and job. One sends power, and one receives it. The IEC C13 C14 pair shares ratings but looks very different up close. Let’s cover shape, ratings, certifications, and pins. Each one helps you spot the right end in seconds.
Connector Shape and Build
Look at the face of each end, and the difference jumps out. The C13 is a female block with three slots. Its outer edge has two flat sides and a rounded top. The C14 is the reverse. It has three flat pins sitting inside a hollow shell that the C13 slides into.
On a device, the C14 usually looks like a small notched hole in the back panel. People often call this the C14 power socket, even though it holds pins. The shell shape is keyed, so the C13 only fits one way. That stops you from flipping line and neutral by mistake.
A quick tip from the field helps here. If a C13 feels loose in a device, don't wrap it with tape. A worn or stretched C13 end can arc and get hot. Swap the cord instead, since a new one costs less than a repair.
Build quality matters more than most people think. A good cord uses a molded strain relief so the wires don't pull loose. Cheap cords may have thin copper and weak jackets. If you need an odd length or color, it pays to order custom-length power cords instead of looping extra slack behind a desk.
Voltage, Current, and Temperature Ratings
Both ends carry the exact same electrical ratings, so neither one is the weak link. The IEC rating is 10 amps at 250 volts. In North America, UL lists the pair at 15 amps at 125 or 250 volts. The higher number comes from different testing rules, not a different part.
The cord's wire gauge sets the real limit. A C14 power cord built with 18 AWG wire is usually rated for 10 amps. A 14 AWG cord can carry the full 15 amps. Always check the label molded into the plug or printed on the jacket.
The wall end has its own NEMA power cable ratings, so match both ends to the same amps. Temperature is the hidden rule. The C13 and C14 are "cold condition" connectors. They are rated for pins up to 70°C.
Hot appliances like kettles and some lab heaters need the C15 and C16 pair instead, which handles 120°C. Using a C13 on a hot device can cause it to soften or melt over time. If you spot brown marks or a burnt smell near the plug, stop using that cord right away.
Certifications and Standards
Both ends follow IEC 60320-1, the global standard for appliance couplers. It sets the exact shape, size, and ratings so parts from any brand fit together. An IEC 60320 C13 connector built to spec will mate with a C14 made on the other side of the world.
In the U.S., look for UL listing on the full cord set. Cord sets are tested under UL 817, and the cable jacket under UL 62. In Canada, CSA C22.2 No. 21 covers cord sets. Europe uses marks like VDE and CE.
Many quality cords are also RoHS-compliant, which means they skip harmful materials like lead. If the listing isn't printed on the cord, ask the seller for the UL file number. A missing mark is a red flag. Uncertified cords may use thinner copper than the label claims.
That can lead to heat and early failure. For data centers, also check for a jacket rating like SJT, which handles daily wear well. The jacket letters are usually printed next to the gauge, a few inches from the NEMA power cable plug.
Number of Pins
Both ends use three contacts. The C14 has three flat pins, and the C13 has three matching slots. One contact is for line, one for neutral, and the center one is for ground. That ground pin is a big safety feature. It gives stray current a safe path if something inside the device fails.
This is where the C13 differs from its smaller cousins. The C7 "figure-8" connector has only two contacts and no ground. It's common on game consoles and small speakers. The C5 "cloverleaf" has three contacts but a smaller body for laptop bricks.
A C13 power plug won't fit into either of those inlets. So if your device has a two-pin inlet, you'll have to pick a different cord. Counting pins is the fastest way to sort a mystery cord. Three slots in a rounded block means C13.
Two round holes in a figure-8 shape means C7. If the end has pins instead of holes, flip your thinking and look for the male version. Older printers and some audio gear still use C7, so keep one of each in a spare box.
What is The Difference Between C13 and C14 Power Cords?
Here's the quick version for anyone shopping or sorting a box of spares. C13 and C14 power cords share ratings and standards but differ in gender, location, and job. The table lines up every detail side by side. Use it to check what you have before plugging in.
|
Feature |
C13 |
C14 |
|
Gender |
Female (slots) |
Male (pins) |
|
Number of contacts |
3 (line, neutral, ground) |
3 (line, neutral, ground) |
|
Common location |
End of the power cord |
Device inlet or rack strip outlet |
|
IEC rating |
10 A, 250 V |
10 A, 250 V |
|
UL rating (North America) |
15 A, 125/250 V |
15 A, 125/250 V |
|
Max pin temperature |
70°C |
70°C |
|
Standard |
IEC 60320-1 |
IEC 60320-1 |
|
Mates with |
C14 |
C13 |
|
Typical cord |
NEMA 5-15P to C13 |
C14 to C13 jumper |
|
Common uses |
PCs, monitors, printers |
Servers, PDUs, UPS outputs |
|
Typical wire gauge |
18 AWG or 14 AWG |
18 AWG or 14 AWG |
Get the Right Fit With TS Cables
The C13 is the female end on your cord, and the C14 is the male inlet or plug it mates with. They share the same 10 A or 15 A rating. Pick a C13 to C14 cable for racks. Shop TS Cables for certified power cords in the lengths your setup calls for.
FAQs
Is C13 male or female?
The C13 is female. It has three slots that accept the three pins of a C14. You'll usually find it on the device end of a power cord.
Can I use a C13 cord on a C15 inlet?
The C13 won't fit there. The C15 inlet has a ridge that blocks the C13. This keeps cold-rated cords away from hot appliances like kettles.
What is a C14 to C13 cord used for?
It connects servers and network gear to rack power strips or UPS units. It can also work as a short extension for any device with a C14 inlet.
Are all C13 cords the same?
They share the same connector shape, but wire gauge, jacket type, and length vary. A 14 AWG cord carries more current than an 18 AWG cord.
Can a C13 cord carry 240 volts?
Yes, it handles that voltage. The C13 is rated up to 250 volts. Just make sure the wall plug on the other end matches your outlet and local voltage.
Further Reading
Power cords have more to them than a plug and a wire. These TS Cables posts cover wall plugs, cord ratings, and custom lengths so your next order fits the first time: