Skip to content

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Cat6 Pure Copper — Buy More, Save More with Bulk Pricing

Check Now!

Types of Audio and Video Cables: A Comprehensive Guide

Types of Audio and Video Cables: A Comprehensive Guide
Wajhi K

There are two big families of audio and video cables: analog and digital. Analog cords like AUX, RCA, XLR, composite, component, and VGA send signals as waves. Digital cords like optical, HDMI, DisplayPort, and USB-C send signals as ones and zeros.

Some cords carry only sound, some carry only video, and a few carry both. The right pick depends on the ports on your gear and the quality you want. Let’s walk you through each type, what it looks like, what it's good at, and where you'll find it in a home or studio.

Types of Audio Cables

Sound cords come in two flavors. Analog ones carry a smooth electrical wave, and digital ones carry data. Most audio cable types you'll meet at home fit one of these two groups. Below is break down each cord, starting with the classic analog plugs and moving to modern digital links.

Analog Audio Cables

Analog cords have been around since the days of record players, and they still work great. There are several types of audio connections in this group, each with its own plug and job. Some are made for headphones, some for microphones, and some for speakers. Let's go through them one at a time.

3.5mm Auxiliary (AUX) Cables

The 3.5mm AUX cord is the one in almost every junk drawer. It has a small round plug on each end. You'll find it on headphones, older phones, car stereos, and laptops. Most AUX plugs have three sections, which carry left sound, right sound, and ground.

Headset plugs add a fourth ring for a microphone. Among everyday sound cable types, this one is the most common by far. Keep AUX runs under 10 feet for clean sound. Longer runs can pick up hum from nearby power cords.

RCA Cables

RCA cords have a center pin with a metal ring around it. They usually come in color-coded sets. Red is right audio, and white is left audio. You'll see them on turntables, DVD players, receivers, and older game consoles.

There are a few RCA cable types to keep straight. Stereo audio pairs use red and white plugs. Composite video uses a single yellow plug. Digital coax audio uses an orange plug on a 75-ohm cable. RCA lines are unbalanced, so they pick up more noise as the cable length grows. Keep line-level runs short for the cleanest sound.

XLR Cables

XLR cords are the workhorses of studios and live stages. The plug is round with three pins and a latch that clicks into place. That latch stops the cable from getting yanked out mid-song.

XLR lines are balanced. They carry two copies of the signal, one flipped. Noise picked up along the way cancels out at the other end. That's why XLR can run 100 feet or more without hum. Microphones, mixers, and powered speakers use it. Many mics also get 48-volt phantom power through the same cord.

¼ Inch (TS and TRS) Cables

The ¼ inch plug is the big brother of the 3.5mm plug. It's about twice as thick and much tougher. Guitar players, keyboard players, and sound techs use it every day. Studio headphones often have one too, or an adapter for it.

These plugs come in two main styles, TS and TRS. The difference is the number of rings on the tip. One ring means mono, and two rings means stereo or balanced. Picking the right one matters with audio cables and connectors in a studio. A wrong match can cut a channel or add hum.

TS Cables

TS stands for tip and sleeve. The plug has one black ring near the tip. It carries a single mono signal plus ground. This is the classic guitar cable.

Since TS lines are unbalanced, they pick up noise over long runs. Try to keep guitar cords under 20 feet. Longer cords also soften the high notes a little. If your amp sounds dull, a shorter, better-shielded cord is a cheap fix to try first.

TRS Cables

TRS stands for tip, ring, and sleeve. The plug has two black rings, so you get three contacts. That third contact lets it carry stereo sound or one balanced mono signal.

Headphones use TRS for left and right channels. Studio monitors and audio interfaces use it for balanced lines. A balanced TRS run can go about as far as XLR without trouble. Check the jack's label before plugging in. A TRS cord in a TS jack works, but you lose the balance.

Speaker Wire

Speaker wire is the simplest cable in the bunch. It's just two copper wires side by side, with no plug at all on many runs. It carries the strong signal from an amplifier to passive speakers.

Thicker wire handles longer runs. Use 16 AWG for runs under 50 feet, and 14 or 12 AWG for longer ones. One wire usually has a stripe or ridge to mark positive. Match positive to positive on both ends. If one speaker is wired backward, the bass sounds thin and hollow.

Digital Audio Cables

Digital cords send sound as data, so the signal stays clean from end to end. Some of these lines carry sound alone, and some handle both sound and video. HDMI is one of the main types of audio and video connectors, so it shows up here too. The cords below are what you'll find on TVs, soundbars, and receivers.

Optical Cables

Optical cords, also called TOSLINK, send sound as pulses of light. You'll see a red glow at the plug end when it's working. The plug is square with a small flap that protects the tip.

Since light can't pick up electrical noise, optical is great near power cords. It carries stereo and 5.1 surround sound like Dolby Digital and DTS. It can't carry lossless formats like Dolby TrueHD or Dolby Atmos in full quality. Don't bend it sharply, since a kink can crack the glass or plastic core inside.

Coaxial Cables

Digital coaxial audio uses a single 75-ohm cable with an RCA plug, often orange. It follows the S/PDIF standard, just like optical. Both carry the same surround formats.

Coax has one edge over optical. The metal plug clicks in firmly and handles bends better. It can pick up electrical noise, though, so keep it away from power strips. Most DVD players, older receivers, and some TVs have a coax output. If your gear has both ports, either one works fine.

HDMI Audio Cables

HDMI is the modern way to move sound and video on one cord. Most home theater setups now run on audio video cables like this. A feature called ARC lets your TV send sound back down the same cord to a soundbar.

The newer eARC goes further. It carries lossless Dolby Atmos and DTS:X at up to 37 Mbps. To use eARC, plug into the HDMI port labeled "eARC" on your TV. Turn the setting on in the TV's sound menu. One cord replaces a tangle of separate audio lines.

Types of Video Cables

Video cords split into analog and digital, just like sound cords. Older video cable types carry a wave, while newer ones carry data. The jump in quality between the two is huge. Today's display cable types are almost all digital. The sections below cover each one in order.

Analog Video Cables

Analog video cords filled living rooms and offices for decades. Many television cables types from the 1990s and 2000s still work on older TVs and projectors. They can't match HD, but they're handy for retro consoles and VCRs. Here are the three you'll run into most.

Composite Cables

Composite is the single yellow RCA plug. It sends the whole image down one wire. That makes it simple, but the image is soft. It tops out at standard definition, about 480i.

Composite usually travels with red and white audio plugs in a three-pack. Those audio visual cables colors became a household standard. Yellow is video, red is right audio, and white is left audio. Plug each color into the matching jack and you're set. It's still the easiest way to hook up an old VCR or a retro game console.

Component Cables

Component splits the image into three wires. The plugs are red, green, and blue. They carry brightness and two color signals separately. That gives a much sharper image than composite.

Component can reach 1080i, and some gear even handles 1080p. Watch out for one mix-up. The red plug in a component set is for video, not audio. Sound needs a separate red and white pair. Many people end up with five plugs in a row and get confused. Match the colors on both ends and it works.

VGA (Video Graphics Array) Cables

VGA is the blue plug with 15 pins in three rows. It was the standard computer monitor link for years. Thumb screws on each side keep it locked in.

VGA can show 1920x1080 and even higher on good cords. Quality drops on long runs, and the image can look a bit fuzzy next to digital. It carries no sound at all. You'll still find it on projectors, older monitors, and some servers. Newer monitor cable types like HDMI and DisplayPort have mostly replaced it.

Digital Video Cables

Digital video cords deliver sharp, pixel-perfect images. There are several video connector types in this group, and each one fits a different kind of device. Some carry sound too, and some don't. The cords below range from older DVI to the newest USB-C and Thunderbolt links.

DVI (Digital Visual Interface) Cables

DVI is the white plug with a grid of pins and a flat blade. It came out in 1999 to replace VGA. There are three versions. DVI-D is digital only. DVI-A is analog only. DVI-I handles both kinds of signal.

Single-link DVI reaches 1920x1200 at 60 Hz. Dual-link DVI reaches 2560x1600. Most DVI ports don't carry sound, though a few graphics cards send audio through a DVI-to-HDMI adapter. That trick only works with certain cards and drivers.

HDMI (High-Definition Multimedia Interface) Cables

HDMI is the flat, slightly trapezoid plug on almost every TV and console. Of all the types of AV connectors, it's the one most homes use daily. It carries video, sound, and even device control on one cord.

The HDMI version matters a lot. HDMI 2.0 handles 4K at 60 Hz. HDMI 2.1 reaches 48 Gbps, which supports 4K at 120 Hz and 8K at 60 Hz. Look for "Ultra High Speed" on the box for 2.1 gear.

DisplayPort Cables

DisplayPort is the PC gamer's favorite. The plug has one flat side and one angled corner, plus small latches that lock it in. It carries video and sound.

DisplayPort 1.4 reaches 32.4 Gbps, enough for 4K at 144 Hz with compression. DisplayPort 2.1 jumps to 80 Gbps. It can also chain several monitors from one port. It's one of the types of audio-video connectors built mainly for computers, so TVs rarely have it.

USB-C and Thunderbolt Cables

USB-C is the small oval plug that fits either way up. With a feature called DisplayPort Alt Mode, it carries a full image to a monitor. It can also carry data and up to 240 watts of power at the same time.

Thunderbolt uses the same USB-C plug shape. Thunderbolt 4 runs at 40 Gbps, and Thunderbolt 5 reaches 80 Gbps. One cord can run two 4K screens, a dock, and a laptop charger. Not every USB-C cable carries an image, though. Look for a DisplayPort logo, a Thunderbolt bolt, or "video" on the label before you buy video cables in this style.

Find the Right Connection at TS Cables

Pick analog cords for older gear and digital cords like HDMI, DisplayPort, and USB-C for sharp modern setups. Check the ports on your gear first, then match the cable to them. Keep this audio video cables guide handy. TS Cables offers quality cords that are built for clear sound and video.

FAQs

Which cable gives the best image quality?

HDMI 2.1 and DisplayPort 2.1 give the sharpest image today. Both support 4K at high refresh rates and 8K. Pick the one your devices support.

Is optical better than HDMI for audio?

HDMI with eARC is better. It carries lossless Dolby Atmos and DTS:X. Optical tops out at compressed 5.1 surround, which still sounds good on most soundbars.

Can I connect RCA to HDMI?

Yes, but you'll use a powered converter box. It turns the analog RCA signal into digital HDMI. A simple plug adapter won't work here.

Why does my guitar cable hum?

TS guitar cables are unbalanced, so they pick up noise from lights and power cords. Try a shorter, well-shielded cable and move it away from power strips.

Does VGA carry sound?

No, VGA only carries video. For sound, run a separate 3.5mm AUX cord from your computer to your speakers or monitor.

Further Reading

A great setup needs more than the right video cord. Explore these TS Cables guides on home networks, TV connections, gaming, and custom builds to round out your home theater or desk:

Wajhi K

Wajhi K

A networking and Ethernet cabling expert with extensive knowledge of structured connectivity solutions. He shares practical insights on Ethernet cables, keystone jacks, indoor/outdoor cabling, and plenum- and riser-rated cables, helping readers make informed decisions for reliable network installations.

in Follow
Back to blog

Leave a comment