OM3 Fiber Performance
OM3 offers an effective modal bandwidth of 2,000 MHz·km at 850 nm. IEEE 802.3 supports 10GBASE-SR up to 300 meters and 40GBASE-SR4 up to 100 meters. It also carries 100GBASE-SR4 up to 70 meters. Gigabit links reach much farther, which makes OM3 a practical choice for many enterprise networks.
Match Your Existing OM3 Plant
Splicing OM4 pigtails onto OM3 cable won't add reach, since the link performs at the OM3 level. Matching grades keeps the link predictable and the documentation honest. This set gives you a like-for-like termination for OM3 backbones.
Tight Buffer Benefits
The 900 µm tight buffer is bonded to the 250 µm coated fiber. It stiffens the strand and resists crushing in crowded trays. Strip it in short passes, around 1.5 to 2 cm at a time. Use a three-hole stripper sized for 900 µm buffer.
SC/UPC Connector
Each fiber ends in an SC connector with a 2.5 mm ceramic ferrule and a square, keyed housing. It meets the TIA FOCIS-3 interface. The UPC polish keeps physical contact tight for low insertion loss.
Splicing Multimode Fiber
Fusion splicers include dedicated programs for 50 µm multimode fiber. Select the correct mode before splicing, since single-mode settings won't give the best result. Multimode's larger core is forgiving of small alignment errors, and typical splice loss stays very low when cleaves are clean.